U SING C ONTROL P ANEL3.2Control Panel ButtonsCancel/ReprintReprint last page of the jobPress Cancel/Reprint and hold until the control panellights blink to cancel a job the printer is currentlyprinting. The Error light will blink while the print jobis cleared from both the printer and the computer, andthen return to the Ready mode. This may take sometime, depending on the size of the print job.Note: If the Cancel/Reprint button is accidentallypushed, the job must be reprinted. There is no undofunction.If you press Cancel/Reprint in the Ready mode, theprinter prints the last page of the last print job. Seepage 5.20.Cancel jobToner SaveToner SavePress Toner Save to turn the Toner save mode on oroff. The printer must be in the Ready mode.• If the button backlight is on, toner save modeactivates and the printer uses less toner to print adocument.• If the button backlight is off, toner save mode isdisabled and you will print in normal quality.To enable or disable the Toner Save mode using thisbutton, the Toner Save Mode option in the printerdriver must be set to Printer Setting.For further information on the Toner Save mode,see page 5.6.(on)(off)Turn the Toner Save Mode on/off
