P RINT M EDIA 4.5Loading PaperThe automatic input tray holds 150 sheets of paper and fivesheets of special media. See “Media Sizes and Capacities” onpage 4.2 for acceptable paper size and capacities for eachinput tray.Load a stack of paper into the automatic input tray and print.For details on loading paper in the automatic input tray, see“Loading Paper” on page 2.4.Note: Before using the automatic input tray, you must removethe paper from the manual input tray.Proper paper loading helps prevent paper jams and insurestrouble-free printing. Do not remove paper from the tray(s)while a job is printing. Doing so may cause a paper jam.Using the Automatic Input TrayIf you select Manual in the Paper Source option, you can manually load paper in themanual input tray. Manually loading paper can be helpful when you want to check the printquality after each page is printed.If you experience a paper jam from the automatic input tray, load one sheet of paper at atime into the manual input tray.Note: To avoid a paper jam, use the manual tray with the automatic input tray loaded with paper.Using the Manual Input Tray1 Load the print media in the manualinput tray with the print side up.Adjust the paper guide against thestack of print media without bendingthe stack.
