A PPENDIX A.25Printing from DOS ApplicationsTo access the Remote Control Panel1 Make sure that the Remote Control Panel is in your pathstatement. You can check your path by typing PATH andpressing Enter. If the Remote Control Panel directory is notin your path, you will have to change to the defaultdirectory C:\DOSUTIL to start the program.2 At the DOS prompt, type DOSRCP and press Enter.After the Remote Control Panel appears, you can activate itsselections in one of two ways:• With the mouse – Move the mouse to position the pointer onthe desired selection, then click the left mouse button.• With the keyboard – Press the key that corresponds to thehighlighted letter in the selection name.The Remote Control Panel allows you to access the followingfeatures:PRINTING• Paper Size sets the paper size.• Paper Source sets the default paper source.• Copies sets the number of copies printed for each page.• Orientation determines how the output is printed on thepage.• Top Margin sets the top margin of the print material.• Left Margin sets the left margin of the print material.• Auto CR sets how the printer performs a carriage return.• Quality determines the print resolution.
