S ETTING U P Y OUR P RINTER2.144 The Copy to Floppy dialog box appears.Select the desired components you want to copy to thediskette from the Select box. You can select PCL Driver,USB Driver and DOS RCP.Select the floppy disk drive that you will be inserting thediskette into.5 Click Copy all disk images.If you want to copy a portion of the selected component,select the disk you want to copy in the Disk Imageswindow, and then click Copy selected disk images.6 When prompted, insert a blank, formatted diskette intothe floppy drive, and click Yes to copy the first diskette.For multiple diskettes, when the first diskette is finished,you are prompted to insert disk 2.Make sure you label each diskette in order as you createit: ML-1250 PCL 6 driver, disk 1 of 2, etc.Shows the path ofthe selectedcomponent.Select thecomponent youwant to copy.Shows the numberof disks required tocopy the selectedcomponent.Select the floppydrive you will use.Installing Software from Diskette
