Samsung ML-2545 User Manual

Also see for ML-254 Series: Quick installation guide Manual Del Usuario User manual

Contents

Basic setup_ 253.basic setupAfter installation is complete, you may want to set the machine’s default settings. Refer to the next section if you would liketo set or change values. This chapter gives you step-by-step instructions for setting up the machine.This chapter includes:• Altitude adjustment • Setting the default tray and paperAltitude adjustmentPrint quality is affected by atmospheric pressure, which is determined by theheight of the machine above sea level. The following information will guideyou on how to set your machine for the best print quality.Before you set the altitude value, determine the altitude where you are.01 High 32 High 23 High 14 Normal• For Windows and Macintosh: See "Device Settings" on page 39.• For Linux: See "Using Smart Panel" on page 39.Setting the default tray and paperYou can select the tray and paper you would like to keep using for printingjob.From your computerWindows1. Click the Windows Start menu.2. For Windows 2000, select Settings > Printers.• For Windows XP/2003, select Printer and Faxes.• For Windows 2008/Vista, select Control Panel > Hardware andSound > Printers.• For Windows 7, select Control Panel > Hardware and Sound >Devices and Printers.• For Windows Server 2008 R2, select Control Panel > Hardware> Devices and Printers.3. Right-click your machine.4. For Windows XP/2003/2008/Vista, press Printing Preferences.For Windows 7 and Windows Server 2008 R2, from context menus,select the Printing Preferences.If Printing Preferences item has ► mark, you can select otherprinter drivers connected with selected printer.5. Click Paper tab.6. Select tray and its options, such as paper size and type.7. Press OK.If you want to use special-sized paper-such as a billing paper,select Edit... in the Paper tab in the Printing Preferences. (See"Opening printing preferences" on page 32.)MacintoshMacintosh does not support this function. Macintosh users need tochange the default setting manually each time they want to print usingother settings.1. Open a Macintosh application and select the file you want to print.2. Open the File menu and click Print.3. Go to Paper Feed pane.4. Set appropriate tray from which you want to print.5. Go to Paper pane.6. Set paper type to correspond to the paper loaded in the tray fromwhich you want to print.7. Click Print to print.