5 Align the connector on the cardwith the connector on the printercontrol board. Push the card firmlyinto the connector until it iscompletely in place.Result: The two connectors should fitsnugly together.P RINTER O PTIONSF.103 Remove the two screws from themetal plate covering the openingfor cable connector.Remove the plate.4 Unpack the option card.6 Gently tighten the screws to secure the card to the system board.7 Continue with ‘Closing the Printer Cover’ on page F.3.8 Install the network printer driver(called SyncThru) provided onthe CD-ROM. See Network Management Software User’s Guide forinstallation.Network Option Card
