14 Set the IP address of the WINDOWS pc running SyncThruin step1. For example, if the IP address is 155.213.211.12,follow these steps:a Press Item until SV-IP B1 appears on the display.b Press Value until 155 appears on the display.c Press Enter/Cancel.d Press Item until SV-IP B2 appears on the display.e Press Value until 213 appears on the display.f Press Enter/Cancel.g Press Item until SV-IP B3 appears on the display.h Press Value until 211 appears on the display.i Press Enter/Cancel.j Press Item until SV-IP B4 appears on the display.k Press Value until 12 appears on the display.l Press Enter/Cancel.15 Reset printer and the firmware will be upgraded.NETWORK MENUNotes: After the ”Completed. Network Card will start about 30secslater” message is displayed on SyncThru, click OK.It may take a few seconds to write the new file to Firmware.Normally 30 seconds is sufficient.U SING O PERATOR P ANEL 3.27
