Samsung ML55E-R Quick Setup Manual

Also see for ML32E: Quick reference guide User manual Quick setup guide

Quick Setup GuideML32E·ML55E·ML55E-R• The colour and the appearance may differ depending on the product, and the specifications are subjectto change without prior notice to improve the performance.• Download the user manual from the website for further details.http://www.samsung.com/displaysolutionsThe terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo aretrademarks or registered trademarks of HDMI Licensing LLC in the United States and othercountries.BN68-07856H-00Checking the ComponentsContact the vendor where you purchased the product if any components are missing.Quick Setup Guide Warranty card (Not available in somelocations)Regulatory guide MagicInfo Software DVD++--Power cord Batteries (Not available in some locations) Remote Control RS232C(IN) adapterProximity sensor Screw (M3L8, 1 piece) (M4L8, 4 pieces) Cleaning clothTroubleshooting GuideReverse SideIR INDVI /MAGICINFO INHDMI INDP OUTDP INIR OUTDVI /HDMIAUDIO IN RJ45AUDIO OUTUSBPROXIMITYSENSORUSBRS232C OUTRS232C IN01 02 03 04 05 06 07 0809 10 11 1201 Connects to MDC using an RS232C adapter.02 Outputs a signal.03 Receives a signal from an external source.04 Connect to a USB memory device.05 Connects to a USB device or proximity sensor.PROXIMITY SENSOR: This must be connected to the cable if the Proximity sensoris in use.06 DVI: Connects to a source device using a DVI cable or HDMI-DVI cable.MAGICINFO IN: Use the (dedicated) DP-DVI cable when connecting a network box(sold separately).07 Connects to a source device using a DP cable.08 Connects to a source device using an HDMI cable.09 Connects to another product using a DP cable.10 Receives sound from a source device via an audio cable.11 Connects to the audio of a source device.12 Connects to MDC using a LAN cable.Issues SolutionsThe screen keeps switchingon and off.Check the cable connection between the productand PC, and ensure the connection is secure.No Signal is displayed on thescreen.Check that the product is connected correctly witha cable.Check that the device connected to the product ispowered on.Not Optimum Mode isdisplayed.This message is displayed when a signal from thegraphics card exceeds the product’s maximumresolution and frequency.Refer to the Standard Signal Mode Table and setthe maximum resolution and frequency accordingto the product specifications.The images on the screenlook distorted.Check the cable connection to the product.The screen is not clear.The screen is blurry.Adjust Coarse and Fine.Remove any accessories (video extension cable,etc) and try again.Set the resolution and frequency to therecommended level.The screen appears unstableand shaky.Check that the resolution and frequency of thePC and graphics card are set within a rangecompatible with the product. Then, change thescreen settings if required by referring to theAdditional Information on the product menu andthe Standard Signal Mode Table.There are shadows or ghostimages left on the screen.Issues SolutionsThe screen is too bright.The screen is too dark.Adjust Brightness and Contrast.Screen color is inconsistent. Go to Picture and adjust the Color Space settings.White does not really lookwhite.Go to Picture and adjust the White Balance settings.There is no sound. Check the connection of the audio cable or adjustthe volume.Check the volume.The volume is too low. Adjust the volume.If the volume is still low after turning it up to themaximum level, adjust the volume on your PCsound card or software program.The remote control does notwork.Make sure that the batteries are correctly in place(+/-).Check if the batteries are flat.Check for power failure.Make sure that the power cord is connected.Check for any special lighting or neon signsswitched on in the vicinity.

/ 2

Related manuals for Samsung ML32E