Samsung MSYS 5200 User Manual

Also see for MSYS 5200: Service manual

Contents

2.28 Automatic Dialing3. The display asks you to enter a name. Enter the desired name (up to20 digits). For information on how to enter names, see page 2.4.OrIf you don’t want to assign a name, skip this step.If you assign a name to the number, the name appears in the displaywhen you press the one-touch button.4. Press Enter when the name appears correctly or without entering aname.5. To set another one-touch number, press the desired one-touchbutton and repeat steps 2 through 5.OrTo return to Standby mode, press Stop.Sending a Fax Using a One-Touch Number1. Load a document you want to send a fax.2. Press the one-touch button (01 through 20) to which you stored anumber. The number will be automatically dialed, then the documentbegins to transmit when the remote fax machine answers the phone.Using Address LabelA One-touch label sheet is included with your machine. As you storenumbers in one-touch dial buttons, make a note of the numbers on thelabel to remind you which number is stored in each position.1. Remove the clear cover andlabel using an instrumentwith a pointed end, asshown at right.2. Write information on thelabel and replace the labeland cover.You may want to use pencilin case you wish to changethese numbers later.