Samsung MagicLAN SWL-2000N User Manual

Contents

727.4.2.3 Explanation on various Commands•• help: Displays list of all the commands.Usage: help [command]•• show: Displays the number of attached clients in both wireless and wired LAN.Similar to the “Bridge Table Report” screen of the Web Management Utility.a. Usage: show [A | G | S]- A: List of all known clients attached via wireless LAN.- G: List of all known clients attached via wired LAN.- S: List of all wireless stations.b. The result of the command is list providing the following information.- Net ID: IEEE network address of the client.- State: Current relationship of client with AP(Associated, Disconnected, Detected, is bridging, bridged, Local AP, Unknown).- Channel: Radio channel.- Power: Whether the power of the client is on or off. (On, Off)- Current AP: The Access Point with which the unit is associated.- IP address: IP address of the client.• time: Displays the current date and time and those of last restarted time.• settime: Sets the system time.Usage: “settime HH(hours):MM(minutes):SS(seconds)”• setdate: Sets the system date.Usage: “setdate MM(month):DD(date):YY(year)”• config: Displays the current system settings for configuration. Note that if a configurationchange has been made which requires a system restart to take effect, both the old and the newvalues will be shown.• stats: Displays traffic statistics. Statistics are displayed for the last 10 second interval. Toview the cumulative total, use the command line of “stats c”.• logout: After this command has been issued the user must re-enter the password before anymore commands can be issued.• ver: Displays version information about the Access Point software.• restart: Reinitializes the SWL-2000AP.• ping: Issues an ICMP Echo request (PING) to the specified IP address.Usage: “ping xxx.xxx.xxx.xxx [yy]”(Here, “xxx.xxx.xxx.xxx” is the destination IP address and yy option will make this pingcommand executed indefinitely.)• nid: nid is the unique number of wireless LAN card, which is also called “MAC Address”.Usage: “nid [add | delete] 123456789abc NAME” / “nid list”