128 Users ManualWired LAN RelatedQ1 functionA is a function that activates the system in rest mode when asignal (such as ping or magic packet commands) arrives from network (wiredLAN).To use function:1. Select My Network Places > View network connections from the Desktop.2. Click the right button on the touchpad over Local Area Connection, and selectProperties.3. Click Configure, and select Power Management tab. Select ’Allow this device tobring the computer out of standby’, then click OK. Restart the system.- If the system in rest mode is activated when there is no received signal, use thesystem after disabling function.- If you turn the power off when is disabled, the LAN LEDmay continue to be lit up.- Connecting wired LAN while using wireless LAN may not execute LAN> function. Configure wireless LAN to ’Disable’ to use function.1. Click on My Network Place> View network connections on the Desktop.2. Right-click over Wireless Network Connection and select Disable.Q2 When I connected 100Mbps wired LAN and the computer exits standby/hibernate mode, a message informing 10Mbps wired LAN connectionappears.A When the computer exits standby/hibernate mode, restoring the network takesabout 3 seconds. When the network is restored, it operates in 100Mbps.
