Identification of features《10》■ Self-timer lampIcon Status DescriptionBlinking- For the first 7 seconds, the lamp blinks at 1 second intervals.- For the final 3 seconds, the lamp blinks quickly at 0.25-second intervals.For 2 seconds, the lamp blinks quickly at 0.25-secondintervals before taking a picture.A picture will be taken after about 10 seconds and 2 secondslater a second picture will be taken.Pressing the remote control shutter button will allow aninterval of 2 seconds before the image is taken.BlinkingBlinkingBlinking※ To open the battery chamber cover, slide it in the direction shown above.■ Camera Status LampBottomStatus DescriptionAfter taking a picturePower onThe lamp blinks while saving the image and thenturns off when ready to take another picture.The lamp turns on and off when the camera isready to take a picture.The lamp blinks.The lamp lights up(LCD monitor turns off after initializing the device)The lamp turns on (LCD monitor turns off)The lamp lights (The subject is in focus)The lamp blinks.The lamp is off.The lamp blinks (The subject is not in focus)While voice memo recordingWhen the USB cable isinserted to a PCTransmitting Data with a PCWhen the AF activatesWhen the USB cable isconnected to a printerWhen the printer is printingBattery holderBattery chamberBattery chamber coverMemory card slotBattery cover leverTripod socketUSB / AV connection terminal