《89》Starting PC mode■ Connecting the camera to a PC■ Disconnecting the camera and PC : Refer to page 91(Removing the removable disk).※ If you selected [Printer] in Step 2, when you connect the camera to yourprinter, the [Connecting Printer] message will display and the connection willnot be established.In this case, disconnect the USB cable, and then follow the procedure fromStep 1 and onward.■ Downloading stored imagesYou can download the still images stored on the camera to your PC's hard diskand print them or use a photo editing software to edit them.1. Connect the camera to your PC with the USB cable.3. Select an image and press the right mousebutton.2. On your computer's desktop display, select[My computer] and double click [RemovableDisk → DCIM → 100SSCAM].The image files will then be displayed.4. A pop-up menu will open.Click the [Cut] or [Copy] menu.- [Cut] : cuts selected files.- [Copy] : copies selected files.● Before inserting any cables or AC adapter, check the directions and donot insert by force. It may damage the cable or camera.
