Exposure compensation ISO《42》This camera automatically adjusts the exposure according to the ambientlighting conditions. You can also select the exposure value in thecompensating exposure menu. Exposure compensation menu is available inthe Program and ASR, Movie mode.■ Compensating Exposure1. Press the exposure compensation menu buttonand the exposure compensation menu bar willappear as shown.2. Touch the button and slide your finger to selectthe exposure value.3. Press the exposure compensation menu buttonagain. The value you set will be saved and theExposure Compensation setup mode will close.※ A negative exposure compensation value reduces the exposure.Note that a positive exposure compensation value increases the exposureand the LCD monitor will appear white or you may not get good pictures.- AUTO :The camera's sensitivity is automatically changedby variables such as lighting value or subjectbrightness.- 80, 100, 200, 400, 800, 1600, 3200 :You can increase the shutter speed while thesame amount of light is present, by increasing theISO sensitivity. However, the image may be saturated in high luminance.The higher the ISO value, the greater is the camera’s sensitivity to light;therefore it has a greater capacity for taking pictures in darker conditions.However, the noise level in the image will increase as the ISO value increases,making the image appear coarse.※ When the [M.CAPTURE] menu is selected, you only can select ISO AUTO,800, 1600, 3200.You can select the ISO sensitivity when taking pictures.The speed or specific light-sensitivity of a camera is rated in ISO numbers.ISO menu is available in the Program and Manual mode.