■ Downloading stored imagesYou can download the still images stored on the camera to your PC’s harddisk and print them or use a photo editing software to edit them.■ Connecting the camera to a PC If you selected [Printer] in Step 2, when you connect the camera to yourprinter, the [Connecting Printer] message will display and the connectionwill not be established. In this case, disconnect the USB cable, and thenfollow the procedure from Step 1 and onward.■ Disconnecting the camera and PC : Refer to page 88(Removing the removable disk).● Before inserting any cables or AC adapter, check the directions anddo not insert by force. It may damage the cable or camera.1. Connect the camera to your PC with the USBcable.2. On your computer’s desktop display, select[My computer] and double click [RemovableDisk DCIM 100SSCAM].The image files will then be displayed.3. Select an image and press the right mousebutton.4. A pop-up menu will open.Click the [Cut] or [Copy] menu.- [Cut] : cuts selected files.- [Copy] : copies selected files.<< 86 >>Starting PC mode Using Removable Disk
