A-4 ManualIntel(R) PRO/Wireless 2200BG NetworkConnectionItem SpecificationsPhysical Dimensions 59.75 X 44.45 mm (Width X Height)Specifications operation temperature Same as system operation specificationsand humidity Temperature: 0 ~ 70°C, Humidity: less than 85%Power Saving Mode 135mWPower Receiving Mode 0.85WSpecification Transmission Mode 1.45WPower 3.3VCompatibility IEEE 802.11g, IEEE 802.11bOperating System Microsoft Windows XP, 2000Network - NDIS5 Miniport DriverSpecifications Media Access Protocol CSMA/CA (Collision Avoidance) withAcknowledgement (ACK)Security Wired Equivalent Privacy support (WEP) 64bit/128bitWPA*, CCX*■ RF SpecificationsR-F Frequency Band 2.4GHz (ISM band)Support Channels 1~13 channelDevice Description TransceiverPower 5 mWTransmission Method 11b mode: DSSS11g mode: OFDMData Rate (Mbps)* 11b mode: 11, 5.5, 2, and 111g mode** : 54, 48, 36, 24, 18, 12, 9, and 6Antenna Type Internal Antenna 2 EA (main/aux)* The data rate may differ from the actual data rate.** 11g mode is supported only when the device is connected with an IEEE802.11g device (e.g.IEEE802.11g compatible Access Point).* This piece of equipment supports the Wi-Fi wireless LAN security standard, WPA (Wi-FiProtected Access) and CCX (Cisco Compatible eXtensions). To connect to a wireless networkconsisting of the WPA and CCX certificates, Windows patch (KB826942) or PROSet may berequired depending on the network settings. For information on the PROSet installation, referto P.4-15 ‘Wireless Network Setup Using the Wireless LAN Setup Program’. For more infor-mation, ask your network administrator.
