101Shooting Functions > Flash101Shooting Functions > FlashShooting FunctionsIn order to capture a realistic photo of a subject, the amount of lightshould be constant. When the light source varies, you can use a flash andsupply a constant amount of light. Select appropriate settings according toa light source and a subject.To set flash options, In Shooting mode, press [m] ĺ b ĺ Flash ĺan option.Icon DescriptionOff: Do not use the flash.ASmart Flash: The camera automatically adjusts the brightnessof the flash according to the amount of light in the surroundingenvironment.A Auto: The flash automatically fires in dark places.Auto Red-eye: The flash automatically fires and reduces red-eyes.Fill in: The flash fires whenever you capture a photo. (Brightness isautomatically adjusted.)Fill-in Red: The flash fires whenever you capture a photo andreduces red-eyes.1st Curtain: The flash firesimmediately after the shutter opens.The camera captures a photo of asubject earlier in an action sequenceclearly. Ball moving directionIcon Description2nd Curtain: The flash fires justbefore the shutter closes. Thecamera captures a photo of asubject later in an action sequenceclearly. Ball moving directionHHi-speed: If the shutter speed is faster than the camera's syncspeed (the quickest time taken to open and close the shutter), theflash will fire multiple times at high speed. The flash starts to firewhile the shutter opens. This option can be set only when youattach a compatible, optional external flash. (SEF580A)• The available options may differ depending on shooting conditions.• There is an interval between two bursts of the flash. Do not move until theflash fires a second time.• If you select Off, the flash does not fire even when an external flash isattached. If you adjust the flash intensity manually, the flash will fire oncewithout a pre-flash.Use only Samsung-approved flashes. Using incompatible flashes may damageyour camera.Flash
