162Camera settings menu > User settingsBracketing SettingsYou can set up the options for each bracketing.* DefaultOption DescriptionAE BracketingSettingsSet the exposure interval. Use the command dial orthe navigation button to select an option. You canalso drag the slider or touch the arrows. (-/+0.3 EV*,-/+0.7 EV, -/+1.0 EV, -/+1.3 EV, -/+1.7 EV,-/+2.0 EV, -/+2.3 EV, -/+2.7 EV, -/+3.0 EV)WB BracketingSettingsAdjust the White Balance interval range of the3 bracketed photos. Use the command dial or thenavigation button to select an option. You can alsotouch the left/right arrows to adjust the Amber/Bluevalues or touch the up/down arrows to adjust theMagenta/Green values. (AB-/+3*, AB-/+2, AB-/+1,MG-/+3, MG-/+2, MG-/+1)For example, AB-/+3 adjusts the Amber value plusor minus three steps. MG-/+3 adjusts the Magentavalue the same amount.P Wiz Bracket Set Select 3 Picture Wizard settings the camera uses tocapture the 3 bracketed photos.Depth Bracket SetSet the depth interval. Use the command dial orthe navigation button to select an option. You canalso drag the slider or touch the arrows to selectan option. (-/+0.3, -/+0.7, -/+1.0*, -/+1.3, -/+1.7,-/+2.0, -/+2.3, -/+2.7, -/+3.0)DMF (Direct Manual Focus)You can adjust the focus manually by rotating the focus ring afterachieving the focus by half-pressing [Shutter]. This feature may not beavailable with some lenses.DMF ResponsivenessSet the focus ring response when you use the DMF function. If you selectHigh, slight rotations of the focus ring are made to adjust the focus. If youselect Low, longer rotations of the focus ring focus are made to adjust thefocus. This feature is supported only when you attach a lens that has thisfeature. (High*, Medium, Low)