195AppendixUpdating the firmwareConnect the camera to the computer and update the firmware of thecamera of the lens.• You cannot run a firmware upgrade without a fully charged battery. Rechargethe battery fully before running a firmware upgrade.• If you update the firmware, user settings and values will be reset. (Date, time,language, and video out will not change.)• Do not turn the camera off while the update is in progress.1 Turn off the camera.2 Connect your camera to the computer with the USB cable.• You must plug the small end of the USB cable into your camera. If thecable is reversed, it may damage your files. The manufacturer is notresponsible for any loss of data.• If you try to plug the USB cable into the HDMI port, the camera may notwork properly.3 Turn on the camera.4 On the computer, select i-Launcher ĺ Firmware Upgrade.5 Follow the on-screen instructions to download the firmware tothe camera.• You can download the firmware of the camera or the lens.6 Turn off the camera when the download completes.7 Remove the USB cable.8 Turn on the camera.9 Press [m] ĺ q ĺDevice Information ĺSoftwareUpdateĺBody Firmware or Lens Firmware.10 Select Yes from a pop-up window on the camera to updatethe firmware.
