Shooting Functions106106Shooting FunctionsShooting FunctionsTo capture a realistic photo of a subject, the amount of light should beconstant. When the light source varies, you can use a flash and supply aconstant amount of light. Select appropriate settings according to a lightsource and a subject.To set flash options, In Shooting mode, press [m] ĺ b ĺ Flash ĺ an option.Icon DescriptionOff: The flash is off.Smart Flash: The camera automatically adjusts the brightnessof the flash according to the amount of light in the surroundingenvironment.Auto: The flash automatically fires in dark locations.Auto Red-eye: The flash automatically fires and reduces red-eye.Fill-in: The flash fires whenever you capture a photo. (Brightness isautomatically adjusted.)Fill-in Red: The flash fires whenever you capture a photo andreduces red-eye.1st Curtain: The flash firesimmediately after the shutter opens.The camera captures a photo of asubject earlier in an action sequenceclearly. Direction of ball's motionIcon Description2nd Curtain: The flash fires justbefore the shutter closes. Thecamera captures a photo of asubject later in an action sequenceclearly. Direction of ball's motionHi-speed: If the shutter speed is faster than the camera’s syncspeed (the shortest time taken to open and close the shutter), theflash will fire multiple times at high speed. The flash starts to firewhile the shutter opens. This option can be set only when youattach a compatible, optional external flash. (SEF-580A) The available options may differ depending on shooting conditions. When you use Red-eye correction, there is an interval between two bursts ofthe flash. Do not move until the flash fires a second time. If you select Off, the flash does not fire even when an external flash isattached. If you adjust the flash intensity manually, the flash will fire oncewithout a pre-flash.Use only Samsung-approved flashes. Using incompatible flashes may damageyour camera.Flash
