107Shooting Functions > FlashReducing the red-eye effectWhen you capture a photo of a person in the dark using the flash, a redglow may appear in their eyes. To reduce this red-eye effect, select AutoRed-eye or Fill-in Red.Without red-eye reduction With red-eye reductionWhen the red-eye reduction function is used, there are two separate flashes. Thesubject should not move until after the second flash. If the subject is too far fromthe camera or moves after the first flash fires, red-eye may not be reduced.Adjusting the flash intensityWhen the flash is on, adjust the flash intensity +/-2 levels.To set the flashintensity,In Shooting mode, select [m] ĺ b ĺ Flash ĺ anoption ĺ [D] ĺ scroll command dial 1 or 2 or press[C/F] to adjust the flash intensity.Back Set ResetFlash : Fill-in
