Factory ResetYou can initialize the phone to its original condition.In Activation screen, select the 6 Factory Reset,and press the Enter[OK] button.- Be sure to check the your data before formatting the IP Phone.End4 Network Setting5 Firmware Upgrade6 Server setting7 Factory ResetIn Activation screen, select the 5 System Setting,and press the Enter[OK] button.End3 System Info4 Network Setting5 Firmware Upgrade6 Server settingSelect Main or Sub System enter the System IPenter the System ID enter the Password, andpress the Enter[OK] button.- The Network information inquires to administrator. End Back1 Main System2 Sub System13 Sub System24 Sub System3After displaying the completed information and returnto previous screen.End BackSetting Completed[SYSTEM Setting]System Server settingYou can set up the System IP, Phone number and Password.Press the Enter[OK] button to start resetting.BackIt will cleareven network infoStart Now[Factory Reset]RebootingYou can reboot the IP Phone.In Activation screen, select the 7 Reboot, and pressthe Enter[OK] button.End5 Firmware Upgrade6 Server setting7 Factory Reset8 RebootPress the Enter[OK] button to start rebooting.backPush Enter button[Reboot Phone]Del. BackEnter System IP23.30.158.181Del. BackEnter System ID3022Del. BackEnter Passward* * * *End3 System Info4 Network Setting5 Firmware Upgrade6 Server settingPreparations