Network settingYou can set up the your IP Phone’s S/W version, Network information and MAC address.In Activation screen, select the 3 Network Settings,and press the Enter[OK] button.End1 Easy Install2 System Info3 Network Setting4 IDLE mode SetingSystem InformationsYou can confirm the your IP Phone’s S/W version, Network information and MAC address.In Activation screen, select the 2 SystemInformation, and press the Enter[OK] button.End1 Easy Install2 System Info3 Network Setting4 IDLE mode SetingSelect desired Information mode, and press theEnter[OK] button.You can show the each informations screen.End Back1 Version2 Network Info3 MAC AddressBackYou can show the Network setting screen.Select desired network mode, and press theEnter[OK] button.End Back1 Static IP2 Dynamic IP3 PPPoE4 VLAN(LAN Port)In case of 1 Static IP.....Enter the IP Address Subnet Mask AddressGateway Address, and press the Enter[OK]button.- The System information inquires to administrator.Del. Back165.213.109.2Enter IP AddressDel. Back255.255.255.0Enter Subnet MaskDel. Back255.255.255.0Enter GatewayIn case of 2 Dynamic IP.....Enter the IP Address Subnet Mask AddressGateway Address, and press the Enter[OK]button. End Back1 Static IP2 Dynamic IP3 PPPoE4 VLAN(LAN Port)Set DHCP Mode[Network Setting]Preparations