Easy Installation for activationYou can set up the network, IP address and system server information settings for activation easily.After connecting power to the product, the Activationscreen is displayed.Select the 1 Easy Install, and press the Enter[OK]button. End1 Easy Install2 System Info3 Network Setting4 IDLE mode SetingInitial Environment Settings for ActivationOnce you connect the phone to its power source, a start-up process begins. After several minutes, thephone’s LCD screen displays the Initial Environment Settings screen for Activation.Or press and hold [ ] button while in booting the phone to enter the Initial Environment Settings forActivation screen.NOTEYou can show the Network setting screen.Select desired network mode, and press theEnter[OK] button.End Back1 Static IP2 Dynamic IP3 PPPoEIf the 1 Static IP.....Enter the IP Address Subnet Mask Gatewayaddress, and press the Enter[OK] button.- The Network information inquires to administrator. Del. Back165.213.109.2Enter IP AddressDel. Back255.255.255.0Enter Subnet MaskDel. Back255.255.255.0Enter GatewayPreparations