143Manually Entering Network SettingsA wireless network can be added when a network is detected(the Wi-Fi icon appears in the Title Bar), or you can add thenetwork manually by entering setting information.1. From the Today screen, drag and drop the WirelessManager widget onto the Today screen.2. Tap the Wi-Fi Settings icon .3. From the Wireless tab, filter the list of available networksby tapping within the Networks to access field andselecting a search parameter:• All Available• Only access points• Only computer-to-computer4. To connect to an available Wi-Fi network, tap and hold theSSID (name) of the Wi-Fi network you want, then selectConnect from popup menu.5. Tap the Network Adapter tab to select a security connectionpreset.6. Select a security connection preset (The Internet or Work)from the Connects to drop down.• Tap The Internet if the network connects to the Internet (does notuse proxy settings) or Work (uses proxy settings).• If the connection is for an ad-hoc network, tap the This device is adevice-to-device (ad-hoc) connection box.7. Tap the Next soft key to continue onto the Authenticationand Data Encryption information. Use the informationprovided by your Network administrator to complete thissection and tap the Next soft key to continue.8. Complete the process by selecting the appropriate securityprotocol parameters from the EAP type drop-down menu.9. Tap the Finish soft key to complete the process.Changing Connection InformationUsing either the Wireless or Network Adapters tabs under“Network Card,” you can change your connection information. Ifyour Wi-Fi network encrypts data with a security key (WEP) oryou need WPA authentication to connect to your Wi-Fi network,you can set the configurations under Wireless tab. The NetworkAdapters tab allows you to choose whether you use a fixed IP orthe DHCP (Dynamic Host Control Protocol).To get the connection information for the Wi-Fi network you areconnected to, follow these steps:
