138Network66 Network6.1.3 Connecting to a Wireless NetworkTo connect your product to your network wireless, you need a wireless router or modem and a SamsungWireless LAN adapter (WIS10ABGN, WIS12ABGNX) , which you connect to your product back or sidepanel USB port. See the illustration below.Samsung’s Wireless LAN adapter is sold separately and is offered by selected retailers, Ecommercesites, and Samsungparts.com. Samsung’s Wireless LAN adapter supports the IEEE 802.11a/b/g and ncommunication protocols. Samsung recommends using IEEE 802.11n. When you play video over anetwork connection, the video may not play smoothly. You must use the “Samsung Wireless LAN adapter” (WIS10ABGN, WIS12ABGNX) to use awireless network. The Samsung Wireless LAN Adapter and the USB extension Cable are sold separately and areoffered by select retailers, Ecommerce sites, and Samsungparts.com. To use a wireless network, your product must be connected to a wireless IP sharer (either a routeror a modem). If the wireless IP sharer supports DHCP, your product can use a DHCP or static IPaddress to connect to the wireless network. Select a channel for the wireless IP sharer that is not currently being used. If the channel set for thewireless IP sharer is currently being used by another device nearby, this will result in interferenceand communication failure. Your product supports only the following wireless network security protocols. Authentication Mode: WEP, WPAPSK, WPA2PSK Encryption Type: WEP, TKIP, AES. If you select the Pure High-throughput (Greenfield) 802.11n mode and the Encryption type is set toWEP, TKIP or TKIP AES (WPS2Mixed) on your AP or wireless router, Samsung TVs will notsupport a connection in compliance with new Wi-Fi certification specifications. If your wireless router supports WPS (Wi-Fi Protected Setup), you can connect to the network viaPBC (Push Button Configuration) or PIN (Personal Identification Number). WPS will automaticallyconfigure the SSID and WPA key in either mode. If your router, modem, or device is not certified, it may not connect to the product via the“Samsung Wireless LAN adapter”. Ensure the product is turned on before you connect the “Samsung Wireless LAN adapter”. Connection Methods: You can setup the wireless network connection in three ways. Auto Setup (Using the Auto Network Search function) Manual Setup WPS (PBC)The LAN Port on the WallWireless IP sharer(router having DHCP server)LAN CableProduct Rear PanelSamsung Wireless LAN Adapter
