1131 Press the MENU button.Press the ▲ or ▼ button to select “Setup”, then pressthe ENTER button.2 Press the ▲ or ▼ button to select “Screen BurnProtection”, then press the ENTER button.3 Press the ▲ or ▼ button to select “All White” or “SignalPattern”, then press the ENTER button.• All White: This function removes after-images on thescreen by changing the color of pixels towhite. Use this function when there areremaining after-images or symbols on thescreen especially when you displayed astill image on the screen for a long time.• Signal Pattern: This function removes after images onthe screen by moving all the pixels onthe PDP according to a pattern. Usethis function when there are remainingafter-images or symbols on the screenespecially when you displayed a stillimage on the screen for a long time.4 Press the MENU button to exit.Notes• To remove after-images on the screen, use either the “All White” or “Signal Pattern” function.Although both functions remove after-images on the screen, “Signal Pattern” is more effective.• The after-image removal function has to be executed for a long time (approximately 1 hour) toeffectively remove after-images on the screen. If the after-image is not removed after performingthe function, repeat the function again.Reducing the Effects of Screen BurnIf screen burn has occurred, you can select a white screen or signal pattern (rolling screen) to helpremove screen burn artifacts.Pixel Shift √All White √Signal Pattern √Screen Burn ProtectionT VMove Enter ReturnPixel Shift √All White √Signal Pattern √Screen Burn ProtectionT VMove Enter ReturnPixel Shift √All White √Signal Pattern √Screen Burn ProtectionT VMove Enter ReturnPlug & Play √Language : English √Time √V-Chip √Caption √Menu Transparency : Medium √† MoreSetupT VMove Enter Return
