Viewing an External Signal SourceUse the remote control to switch between viewing signals from connected equipment, such asVCR, DVD, Set-Top Box, and the TV source (broadcast or cable).44Setting the Signal Source1 Press the MENU button.Press the ENTER button to select “Input”.2 Press the ENTER button to select “Source List”.3 Press the ▲ or ▼ button to select signal source, thenpress the ENTER button.4 Press the MENU button to exit.Notes• When you connect equipment to the TV, you can choose between the following sets of jacks: AV1,S-VIDEO1, COMPONENT 1, COMPONENT 2, PC, or HDMI on the TV’s rear panel and AV2 orS-VIDEO2 on the TV’s side panel.• Before selecting an input source, connect an external device first.• HDMI input can only be selected when the external device is turned on and connected via HDMI.➤➤ Quick way to access viewing an external signal source :Just press the “SOURCE” button on the remote control.Source List : TV √Edit Name √Anynet √InputT VMove Enter ReturnTVAV1 : ----AV2 : ----S-Video1 : ----S-Video2 : ----Component 1 : ----† MoreSource ListT VMove Enter ReturnTVAV1 : ----AV2 : ----S-Video1 : ----S-Video2 : ----Component 1 : ----† MoreSource ListT VMove Enter Return
