55Selecting an External SignalYou can use PIP to view a signal from an external source, such as a VCR.1 Press the MENU button. Press the ▲ or ▼ button to select“Picture”, then press the ENTER button.2 Press the ▲ or ▼ button to select “PIP”, then press theENTER button.3 Press the ▲ or ▼ button to select “Source”, then pressthe ENTER button.4 Press the ▲ or ▼ button to cycle through all of theavailable signal sources:“TV”, “AV1”, “AV2”, “S-Video1”, “S-Video2”,“Component1”, “Component2”, or “HDMI”.The signal from these inputs will not appear if youhave not connected any equipment to the TV'srespective input jacks.5 Press the MENU button to exit.Notes• The same source cannot be selected on both the main and sub screens. However, the same sourcecan be selected on both the main and sub screens for TV.• PC is not available in PIP picture.Mode : Dynamic √Size : 16:9 √Digital NR : On √DNIe Demo : Off √My Color Control √Film Mode : Off √† MorePictureT VMove Enter ReturnPIP : OnSource : TVSwapSize :Position :PIP Channel : DTV Air 3 - 0PIPT VMove Enter ReturnPIP : On √Source : TV √SwapSize : √Position : √PIP Channel : DTV Air 3 - 0 √PIPT VMove Enter ReturnTVAV1AV2S-Video1S-Video2Component 1Component 2HDMI
