Contacts2D. Contacts 533. Select an available speed dial location (or enter a locationusing your keypad) and press Assign (left softkey) orpress .Finding Speed Dial Numbers1. Press > Contacts > Options (right softkey) > Settings >Speed Dial.2. Scroll through speed dial entries. Speed dial numbers aredisplayed in numeric order.– or –Enter the number of a speed dial location using your keypad.3. To display an entry, highlight it and press .4. To dial the entry’s default phone number, press .Adding a New GroupGroups allow you to communicate simultaneously by sending outa broadcast text message to every member of a current group.1. Press > Contacts.2. Press Options (right softkey) > New Group to create a newGroup category.3. Read the onscreen information and press Start(left softkey).4. Add multiple entries (two or more) to your new group byhighlighting a name from the list and pressing . Thisaction places a check mark alongside the name.5. Press Continue (left softkey) and enter a name for the newgroup. (See “Entering Text” on page 24.)6. Press Save (left softkey) to assign the selected entries to thenew group.Note If you attempt to assign an already in-use speed diallocation to a new phone number, you will need to manuallyreplace the existing speed dial assignment. Press Options(right softkey) > Replace to assign the location to the newphone number and delete the previous speed dialassignment.Note Speed Dial location 1 is reserved for voicemail access.Note If several numbers are saved within a single Contacts entry,you can select from these additional numbers by using theleft or right navigation keys.PLS-M330.book Page 53 Friday, September 25, 2009 9:50 AM
