English - 13Storing Channels AutomaticallyYou can scan for the frequency ranges available to you(availability depends on your country).Automatically allocated programme numbers may notcorrespond to actual or desired programme numbers.However you can sort numbers manually and clear anychannels you do not wish to watch.1 Press the MENU button to display the menu.2 Press the ▲ or ▼ button to select Channel, then press theENTER/OK button.3 Press the ENTER/OK button to select Area.4 Select your area by pressing the ▲ or ▼ button, then press theENTER/OK button.5 Press the ▲ or ▼ button to select Auto Store, then press theENTER/OK button.6 Press the ENTER/OK button again to start the search.The search will end automatically.➢ To stop the search before it has finished, press theRETURN or the ENTER/OK button.Sorting the Stored ChannelsThis operation allows you to change the programme numbersof the stored channels.This operation may be necessary after using the auto store.1 Press the MENU button to display the menu.2 Press the ▲ or ▼ button to select Channel, then press theENTER/OK button.3 Press the ▲ or ▼ button to select Sort, then press theENTER/OK button.4 Select the channel that you wish to move by pressing the▲ or ▼ button, then press the ENTER/OK button.5 Select the number of the programme to which the channel isto be moved by pressing the ▲ or ▼ button.Press the ENTER/OK button. The channel is moved to its newposition and all other channels are shifted accordingly.6 Repeat steps 4 to 5 until you have moved all the channels tothe required programme numbers.7 Press the EXIT button to exit.Auto StoreP 1 C -- 40 MHz0 %Enter ReturnStartMove Enter ReturnArea : Asia/W.EuropeAuto StoreManual StoreChannel ManagerSortNameFine TuneChannelT VAsia/W.EuropeCIS/E.EuropeChinaHong Kong/UKAustraliaNZL/IndonesiaSouth AfricaAmericaMove Enter ReturnArea : Asia/W.Europe Auto Store Manual Store Channel Manager Sort Name Fine Tune ChannelT VMove Enter ReturnArea : Asia/W.Europe Auto Store Manual Store Channel Manager Sort Name Fine Tune ChannelT VMove Enter ReturnProg. Ch. Name0 C−−1 C762 C53 C74 C8 SortT V