Samsung PS-42Q91HP Owner's Instructions Manual

Also see for PS-42Q91H: Owner's instructions

Contents

English - 33Setting Up Anynet+The following settings are to use Anynet+ functions.Using the Anynet+ Function1 Press the Anynet+ button.Press the ▲ or ▼ button to select Setup, then press theENTER/OK button.2 Press the ENTER/OK button to select Anynet+ (HDMI-CEC),then press the ENTER/OK button.3 Press the ▲ or ▼ button to select On, then press theENTER/OK button.➢ The Anynet+ (HDMI-CEC) function is enabled.➢ If you select Off, Anynet+ (HDMI-CEC) is disabled.Turning an Anynet+ Device Off Automatically when the TV is Turned Off2 Press the ▲ or ▼ button to select Auto Turn Off, then pressthe ENTER/OK button.3 Press the ▲ or ▼ button to select On, then press theENTER/OK button.➢ The Auto turn off function is enabled.➢ If you select Off, the Auto turn off function is canceled.Press the EXIT button to exit.➢ The Select Device setting of the TV remote control is to be setto TV to use the Anynet+ function.➢ If you set Auto Turn Off to On, connected external devices are also turned off when the TV is turnedoff. However, if the device is recording, it may not be turned off.➢ When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated.SetupAnynet+ (HDMI-CEC) : OffAuto Turn Off : OffSearching ConnectionsEnter ReturnMoveOffOnSetupAnynet+ (HDMI-CEC) : OnAuto Turn Off : OffSearching ConnectionsEnter ReturnMoveOffOnScanning and Switching between Anynet+ Devices1 Press the Anynet+ button.2 Press the ▲ or ▼ button to select Select Device, then pressthe ENTER/OK button.3 Press the ▲ or ▼ button to select to a particular device andpress the ENTER/OK button.It is switched to the selected device.4 If you cannot find a device you want, press the ▲ or ▼ buttonto select Searching Connections, then press the ENTER/OKbutton.The meassage Configuring Anynet+ connection... isdisplayed. When searching devices completes, the connecteddevices are listed in the Anynet+ menu.➢ Switching to the selected devices may take up to 2 minutes.You cannot cancel the operation during the switchingoperation.➢ The time required to scan for devices is determined by thenumber of connected devices.➢ When the device scan is complete, the number of founddevices is not displayed.➢ Although the TV automatically scans devices when it is turnedon using the POWER button, devices connected when the TV is on or under a specific circumstanceare not displayed in the device list. Therefore select Searching Connections menu to searchdevices.➢ If you have selected external input mode by pressing the SOURCE button, you cannot use theAnynet+ function. Make sure to switch to an Anynet+ device by using the Anynet+ button.SetupAnynet+ (HDMI-CEC) : On Auto Turn Off : On Searching Connections Enter ReturnMoveEnterMoveView TVSelect Device Record Menu on Device Device Operation Receiver :Off Setup TV P 1ReturnDVDR1DVDR2DVD1DVD2EnterMoveView TVSelect Device Record Menu on Device Device Operation Receiver :Off Setup TV P 1Return