English - 43 Screen Adjustment: Coarse/Fine/Position/Image Reset- Coarse/FineThe purpose of picture quality adjustment is to remove orreduce picture noise.If the noise is not removed by Fine-tuning alone, thenadjust the frequency as best as possible (coarse) and Fine-tune again.After the noise has been reduced, re-adjust the picture sothat it is aligned on the center of screen.1 Press the ▲ or ▼ button to select Coarse or Fine,then press the ENTER button.2 Press the ◄ or ► button to adjust the screen quality,vertical stripes may appear or the picture may beblurry. Press the ENTER button.- PositionAdjust the PC’s screen positioning if it does not fit the TVscreen.1 Adjust the position by pressing the ▲/▼/◄/► button.2 Press the ENTER button.- Image ResetYou can replace all image settings with the factory defaultvalues.Sharpness : 20Auto AdjustmentScreen Adjustment ►Detailed SettingsPicture OptionsPicture ResetPictureScreen AdjustmentReturnEnterMove5011CoarseFinePositionImage ResetImage Reset is completed.ReturnEnterPositionAdjust
