Samsung PS50B850Y1W User Manual

Contents

0 English Using the MenusSetupOption DescriptionNetwork Setup Ad-hoc: You can connect to a mobile device withoutan access point through the ‘Samsung Wireless LANAdapter’ by using a peer to peer network.How to connect to new Ad-hoc1. Choose Select a network, then a device list isdisplayed.2. While in the device list, press the Blue button on theremote or select Ad-hoc.The message that means the existing networkis disconnected is displayed.3. Input the generated Network Name(SSID) andSecurity Key into the device you want to connect.How to connect an existing Ad-hoc device1. Choose Select a network, the device list isdisplayed.2. Select the device you want in the Device list.3. If security key was applied, input the security key again.If network doesn’t operate normally, pleasecheck the Network Name(SSID) and SecurityKey again. If the Security Key is incorrect, itmay be the reason for the malfunction.Wireless Network Setup-AutoIf you want to connect AP, AP should support DHCP.Only devices which support Ad-hoc mode can beconnected without DHCP.1. Set Network Type to Wireless.2. Select Wireless Network Setup.3. Set Internet Protocol Setup to Auto.The Internet Protocol is set automatically.4. Select a network throughSelect a network throughSelect a network through Select a network.5. Select Network Test to check the network connectivity.Wireless Network Setup-Manual1. SetSetSet Network Type to Wireless.2. SelectSelectSelect Wireless Network Setup.3. SetSetSet Internet Protocol Setup to Manual.4. Set upSet upSet up IP Address, Subnet Mask, Gateway and DNSServer.Press the number buttons on the remote controlwhen you set the Network manually.5. SelectSelectSelect Network Test to check the network connectivity.■••■•■•When unable to connect to an AP(Access Point)Your TV may fail to locate an AP(Access Point) that is configured as a private SSID type.In this case, please change the AP settings and try again. If your Internet service providerhas registered the MAC address of the device used to connect to the Internet for the firsttime and authenticates the MAC address each time you connect to the Internet, your TVmay not be able to connect to the Internet as the MAC address differs from that of thedevice (PC).In this case, ask your Internet service provider about the procedures to connect devicesour Internet service provider about the procedures to connect devicesother than your PC (such as your TV) to the Internet. If you cannot connect to the Interneteven if you have followed the procedures of your Internet service provider, please contacta Samsung Electronics at 1-800-SAMSUNG.*The existing network system may have limitedfunctionality. Do you want to change the networkconnection?NoYes