English Anynet+To connect to Home Theatre1 Connect the HDMI IN (1(DVI), 2, 3 or 4) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device usingan HDMI cable.2 Connect the HDMI IN jack of the home theater and the HDMI OUT jack of the corresponding Anynet+ device using an HDMIcable.Connect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input on theHome Theater.When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from the HomeTheater’s Front Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect the DIGITALAUDIO OUT (OPTICAL) jack on the DVD player or Cable/Satellite Box (ie Anynet Device 1 or 2) directly to the Amplifier orHome Theater, not the TV.Connect only one Home Theater.You can connect an Anynet+ device using the HDMI 1.3 cable. Some HDMI cables may not support Anynet+ functions.Anynet+ works when the AV device supporting Anynet+ is in the Standby or On status.Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.Anynet+ supports up to 3 devices simultaneously.■■■■■■■TVAnynet+ Device 1Anynet+ Device 4 Anynet+ Device 2HDMI 1.3 CableHDMI 1.3 CableHDMI 1.3 CableHome TheatreAnynet+ Device 3HDMI 1.3 CableHDMI 1.3 Cable
