English Using the MenusNetwork Connection - WirelessYou can connect to the network wirelessly through a wireless IP sharer.Connect the ‘Samsung Wireless LAN Adapter’ into the USB1(HDD) or USB2 terminal of the TV.You must use the ‘Samsung Wireless LAN Adapter’(WIS09ABGN) to use a wireless network.Samsung’s Wireless LAN adapter is sold separately. The WIS09ABGN Wireless LAN adapter is offered by select retailers,Ecommerce sites and Samsungparts.com.To use a wireless network, your TV must be connected to a wireless IP sharer. If the wireless IP sharer supports DHCP, your TVcan use a DHCP or static IP address to connect to the wireless network.Samsung’s Wireless LAN adapter supports IEEE 802.11A, IEEE 802.11B, IEEE 802.11G, IEEE 802.11N. When you play DLNAvideo over IEEE 802.11B/G connection, the video may not be played smoothly.If the wireless IP sharer allows you to turn the Ping connection function on/off, turn it on.Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer is currentlybeing used by another device nearby, this will result in interference and communications may fail.If you apply a security system other than the systems listed blow, it will not work with the TV.When applying the security key for the AP (wireless IP sharer), only the following is supported.1. Authentication Mode : OPEN, SHARED, WPAPSK, WPA2PSK2. Encryption Type : WEP, TKIP, AESWhen applying the security key for the Ad-hoc mode, only the following is supported.1. Authentication Mode : SHARED, WPANONE2. Encryption Type : WEP, TKIP, AESIf your AP supports WPS(Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button Configuration) or PIN(Personal Identification Number). WPS will automatically configure the SSID and WPA key in either mode.If the device isn’t certified, it may not connect to the TV via the ‘Samsung Wireless LAN Adapter’.■■■■■■■■■TV Side PanelSamsung Wireless LANAdapterLAN CableWireless IP sharerThe LAN Porton the Wall