Samsung PS63B680T6W User Manual

Also see for PS-63B680: User manual User manual User manual Quick setup guide

Contents

English Using the MenusSetupOption DescriptionNetwork Setup Cable Network Setup-ManualTo connect the TV to the LAN using a static IP address, youmust set up the Internet Protocol (IP).1. Set Network Type to Cable.2. Select Cable Network Setup.3. Set Internet Protocol Setup to Manual.4. Set up IP Address, Subnet Mask, Gateway and DNSServer.Press the number buttons on the remote control whenyou set the Network manually.5. Select Network Test to check the network connectivity.Wireless Network SetupInternet Protocol Setup → Auto / ManualNetwork Test: You can test or confirm the networkconnection status after setting up the network.Select a network: Access Point: You can select the IPsharer to use when using a wireless network.If a wireless Access Point is not in the Access Pointlist, press the Red button.When the connection is made, you will be returnedto the screen automatically.If you have selected an Access Point with a securityauthentication: The Security Key input screenappears. Enter the security key and press the Bluebutton on the remote control.If security encryption type is WEP, 0~9, A~F will beavailable when you input security key.Connecting WPS (Wi-Fi Protected Setup)If Security Key is already set: In access point list, selectWPS.You can select PBC, PIN, Security Key.Connecting by using PBC: Select a PBC (Push ButtonConfiguration). Press the PBC button on the AP(access point) within 2minutes, and wait for connection.Connecting by using PIN: Select a PIN (PersonalIdentification Number).The message showing the PIN Code is displayed.Input the PIN Code at AP device within 2minutes.Select OK and wait for connection.Try again if connecting operation doesn’t work.When the connection is not established althoughtried again, reset the access point. Please refer to amanual of each access point.Connecting by using Security Key: When selectingSecurity Key, the input window is displayed. Input thesecurity key and press ENTERE button.Try again if connecting operation doesn’t work.If Security Key is not set: When security setting ofAP that supports WPS is NONE, you can select PBC,PIN, None Security. None Security is capable ofconnecting to AP directly without using WPC function.Process of PBC, PIN is same as above.Refer to if Security Key is already set.Try again if connecting operation doesn’t work.■•■•••■••••The menu is activated only ifthe ‘Samsung Wireless LANAdapter’ is connected.■** ***Wireless Network SetupSelect a networkn Move E Enter R ReturnSearchAd-hocAP_1AP_2AP_3AP_4 *PBCPINSecurity Key3/9*Press the PBC button on the access point.Access Point Name : AP_3Cancel*Press OK After input TV’s Pincode in the accesspoint’s setup.Access Point Name : AP_3PIN Code : 12345678CancelOK** ***Wireless Network SetupSelect a networkn Move E Enter R ReturnSearchAd-hocAP_1AP_2AP_3AP_4 *PBCPINSecurity Key3/9* **** ** *Wireless Network SetupSecurity Keyn Move Number E Enter R Return_A B C D E F GH I J K L M NO P Q R S T UV W X Y Z0~9 NumberLowercaseDeleteDone