Samsung PS64F5500AM User Manual

English - 18Connecting to a NetworkConnecting the Smart TV to a network gives you access to online services such as the Smart Hub, as wellas software updates.Network Connection - WirelessConnect the TV to the Internet using a standard router or modem.Wireless IP Router or Modemthat has a DHCP ServerLAN Cable (Not Supplied)The LAN Port on the WallWireless Network Precautions• This Smart TV supports the IEEE 802.11a/b/g /n communication protocols. Samsung recommendsusing IEEE 802.11n. Otherwise when you play video over a network connection, the video may not playsmoothly.• To use a wireless network, the TV must be connected to a wireless router or modem. If the wirelessrouter supports DHCP, the TV can use a DHCP or static IP address to connect to the wireless network.• Select a channel that is not currently in use for the wireless router. If the channel set for thewireless router is currently being used by another device, the result is usually interference and/or acommunications failure.• Most wireless networks have an optional security system. To enable a wireless network's securitysystem, you need to create a security key using characters and numbers. This security key is thenneeded to connect to the wireless network.Network Security ProtocolsThe TV only supports the following wireless network security protocols and is unable to connect to non-certified wireless routers:• Authentication Modes: WEP, WPAPSK, WPA2PSK• Encryption Types: WEP, TKIP, AESIf the wireless router has been set to Pure High-throughput (Greenfield) 802.11n mode and the EncryptionType to WEP or TKIP, Samsung Smart TVs will not support the connection in compliance with the new Wi-Fi certification specifications.If the wireless router supports WPS (Wi-Fi Protected Setup), it is possible to connect to the network usingPBC (Push Button Configuration) or a PIN (Personal Identification Number). WPS automatically configuresthe SSID and WPA key settings.[PF5500-XY]BN68-04884A-ENG.indb 18 2013-10-11 �� 2:41:54