Samsung PS64F5500AM User Manual

English - 21• Turning the glasses onPress the power button briefly. The green LED is turned on for 3 seconds.(Make sure that 3D is activated on the TV before using the 3D glasses.)• Turning the glasses offPress the power button briefly. The red LED is turned on for 3 seconds.• Performing the pairing processTurn the TV on and let it power up completely. Press and hold the Powerbutton on the glasses. The green and the red LEDs blink alternately for 2seconds.• Operating rangeRecommended viewing distance 2 ~ 6 m (6.5 to 19.5 ft)Recommended pairing distance 50 cm or less (19.5 in)Recommended pairing distanceRecommended viewing distance2~6 m50 cm✎ Once the 3D glasses are paired, the remaining battery capacity is displayed on the TV screen. (Thisfeature only applies to Samsung F series 3D TVs and 3D glasses that have been available since 2013.)✎ If you keep trying to pair the glasses and the TV, the battery level will decrease significantly. However,the battery level will recover to a certain degree in about a minute.✎ The working distance depends on the existence of obstacles (a person, metal, walls, etc.) betweenthe glasses and the TV and the strength of the Bluetooth signal.✎ Turn off the 3D glasses while they are not in use. If you leave the 3D glasses on, the battery lifespandecreases.Pairing steps1. Turn on the TV, and then move the glasses within 19.5 inches of the TV.2. Press the power button on the 3D glasses briefly. The 3D glasses will power on and pairing will start.3. The message “3D glasses are connected to TV.” will be displayed on the TV screen when the pairing issuccessfully completed.✎ If pairing fails, the 3D glasses will power off.✎ If the first attempt to pair fails, power the TV off and on again and perform step 2.✎ How to pair again: Press the power button on the 3D glasses for more than 1 second.[PF5500-XY]BN68-04884A-ENG.indb 21 2013-10-11 �� 2:41:56