English - 16White BalanceYou can adjust the colour temperature for more natural picture colours.R-Offset / G-Offset / B-Offset / R-Gain / G-Gain / B-Gain: Changing the adjustment value will refresh the adjusted screen.Reset: The previously adjusted white balance will be reset to the factory defaults.Flesh ToneYou can adjust the flesh tone to be more or less red.Changing the adjustment value will refresh the adjusted screen.Edge Enhancement →→ Off / OnYou can emphasize object boundaries in the picture.xvYCC →→ Off / OnSetting the xvYCC mode to on increases detail and colour space when watching movies from an external device (i.e. DVD player).xvYCC is available when the picture mode is set to Movie, and the external input is set to HDMI or Component mode.Picture OptionsYou can customize the additional picture settings to suit your preference.In PC mode, you can only make changes to the Colour Tone, Size and ScreenBurn Protection from among the items in Picture Options.Colour Tone →→ Cool / Normal / Warm1 / Warm / Warm3You can select the most comfortable colour tone to your eyes.The adjusted values are stored according to the selected Picture mode.Warm1, Warm, or Warm3 is only activated when the picture mode is Movie.SizeYou can select the picture size which best corresponds to your viewing requirements.Auto Wide: Sets the picture in Auto Wide format.16:: Sets the picture to the 16:9 aspect ratio.Wide Zoom: Magnify the size of the picture more than 4:3.Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.4:3: Sets the picture to the 4:3 aspect ration.Screen Fit : Use the function to see the full image without any cutoff when HDMI (720p/1080i/1080p) or Component(1080i/1080p) signals are input.The picture size options may vary depending on the input source.The items available may differ depending on the selected mode.In PC Mode, only 16: and 4:3 mode can be adjusted.Settings can be adjusted and stored for each external device you have connected to an input of the TV.Temporary image retention may occur when viewing a static image on the set for more than two hours.After selecting Wide Zoom mode: Press the ► button to select Position, then press the ENTERE button.Press the ▲ or ▼ button to move the screen up / down. Then press the ENTERE button.After selecting Zoom mode: Press the ► button to select Position, then press the ENTERE button. Press the ▲ or ▼button to move the picture up and down. Then press the ENTERE button. Press the ► button to select Size, then pressthe ENTERE button. Press the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction. Then press theENTERE button.After selecting Screen Fit in HDMI (1080i/1080p) or Component (1080i/1080p) mode: Select Position by pressingthe ◄ or ►button. Use the ▲, ▼, ◄ or ► button to move the picture.Reset: Press the ◄ or ► button to select Reset, then press the ENTERE button. You can initialize the setting.If you use the Screen Fit function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the overscanfunction.You can select these options simply by pressing the P.SIZE button on the remotecontrol.Screen ModeWhen setting the picture size to Auto Wide in a 16:9 wide TV, you can determine the picture size you want to see the 4:3 WSS(Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function isintended for users to select it.16:: Sets the picture to the 16:9 aspect ratio.Wide Zoom: Select this menu to view 4:3 aspect ratio pictures over a 16:9 aspect ratio TV by stretching the 4:3 picturevertically.Zoom: Stretches the 16:9 aspect ratio picture vertically.4:3: Selects the screen mode as 4:3.This function is available in Auto Wide mode.This function is not available in Component or HDMI mode.••NN❑NNN••••••NNNNNNNNNNO••••NN Continued...Tint (G/R) : G50/R50Advanced SettingPicture Options ►Picture ResetPicture