English - 0Changing the Sound SettingMode → Standard / Music / Movie / Clear Voice / CustomYou can select the type of special sound effect to be used when watching a givenbroadcast.Press the TOOLS button to display Tools menu.You can also configure the sound mode by selecting Tools → Sound Mode.TEqualizerThe sound settings can be adjusted to suit your personal preferences.Mode: You can select a sound mode to suit your personal preferences.Balance: Controls the balance between the right and left speakers.100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment): To adjust the level of different bandwidth frequencies.Reset: Resets the equalizer settings to the default values.SRS TruSurround HD → Off / OnSRS TruSurround HD is the combined technology of TruSurround and FOCUS, TruBass.SRS TruSurround HD is down mixing technology that makes the Surround Sound effect of virtual 5.1 channel via two speakers.This function provide not only rich deep bass at a low-pitched sound but also improve the resolution at a high-pitched sound.Press the TOOLS button to display Tools menu.You can also set the SRS TruSurround HD by selecting Tools → SRS TS HD.TTruSurround HD, SRS and the symbol are trademarks of SRS Labs, Inc.TruSurround HD technology is incorporated under license from SRS Labs, Inc.Audio Language (only digital channel)You can change the default value for audio languages. Displays the language information for the incoming stream.You can only select the language among the actual languages being broadcast.Audio Format → MPEG / Dolby Digital (only digital channel)When sound is emitted from both the main speaker and the audio receiver, a sound echo may occur due to the decoding speeddifference between the main speaker and the audio receiver. In this case, use the TV Speaker function.You can only select the language among the actual languages being broadcast.Manufactured under license from Dolby Laboratories.Dolby and the double-D symbol are trademarks of Dolby Laboratories.Audio Description (only digital channel)This is an auxiliary audio function that provides an additional audio track for visually challenged persons. This function handles theAudio Stream for the AD (Audio Description), when it is sent along with the Main audio from the broadcaster. Users can turn theAudio Description On or Off and control the volume.Audio Description →→ Off / OnTurn the audio description function on or off.VolumeYou can adjust the audio description volume.Volume is active when Audio Description is set to On.❑❑••••❑❑N❑N❑NSound ControlContinued...Mode : Custom ►EqualizerSRS TruSurround HD : OffAudio Language : ----Audio Format : ----Audio DescriptionAuto Volume : OffSpeaker Select : TV SpeakerSound