Samsung Plasma TV User Manual
Also see for PS50B550: User manualUser manualUser manualUser manual
                                            | |
Contents
|
English - 35Continued...Setting Up Anynet+The following settings help set the Anynet+ functions.Press the TOOLS button to display Tools menu.You can also display Anynet+ menu by selecting Tools → Anynet+(HDMI-CEC).TSetupAnynet+(HDMI-CEC) → Off / OnTo use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ relatedoperations are deactivated.Auto Turn Off → No / YesSetting an Anynet+ Device to turn Off Automatically when the TV is Turned OffThe active source on the TV remote must be set to TV to use the Anynet+ function.If you set Auto Turn Off to Yes, connected external devices are also turned offwhen the TV is turned off. If an external device is still recording, it may or may notturn off.❑NNNScanning and Switching between Anynet+ Devices1. Press the TOOLS button. Press the ENTERE button to selectAnynet+ (HDMI-CEC).. Press the ▲ or ▼ button to select Device List, then press the ENTERE button.Anynet+ devices connected to the TV are listed. If you cannot find a device youwant, press the red button to scan for devices.Only when you set Anynet+ (HDMI-CEC) to On in the Setup menu, the Device Listmenu appears.3. Press the ▲ or ▼ button to select to a particular device and press the ENTEREbutton. It is switched to the selected device.Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching operation.The time required to scan for devices is determined by the number of connected devices.When the device scan is complete, the number of devices found are not displayed.Although the TV automatically searches the device list when the TV is turned on via the power button, devices connected to the TVwhen the TV is on or under some conditions are not automatically displayed in the device list. Press the red button to search for theconnected device.If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure toswitch to an Anynet+ device by using the Device List.NNNNNNNU Move E Enter R ReturnAnynet+(HDMI-CEC) : On ▶Auto Turn Off : YesU Move E Enter R ReturnDevice ListSetupU Move E Enter R ReturnView TVDevice ListRecord : DVDRDVDR MENUDVDR INFOReceiver : OnSetupApplicationMedia Play (USB)Anynet+ (HDMI-CEC) ► |
Related manuals for Samsung PS50B550
manualsdatabase
Your AI-powered manual search engine