40Connecting to a Video Device• Do not connect the power cable before connecting all other cables.Ensure you connect a source device first before connecting the power cable.• You can connect a video device to the product using a cable.― Connecting parts may differ in different products.― Press the SOURCE button on the remote control to change the source.Connection Using an HDMI-DVI Cable― Audio will not be enabled if the product is connected to a video device using an HDMI-DVIcable. To resolve this, additionally connect an audio cable to the audio ports on the productand video device.― After connecting a video device to the product with an HDMI-DVI cable, make sure toconfigure the settings as shown below to enable the video and audio from the video device.You can use the DVI port on the product as an HDMI port by using a DVI-HDMI adapter. Audiois not available if the DVI port on the product is connected to the HDMI port on the PC using aDVI-HDMI adapter.― Sound → set HDMI Sound to AV(HDMI)― Picture → set each screen mode to Video/Image under Picture Mode― System → General → set HDMI Hot Plug to On― Supported resolutions include 1080p (50/60Hz), 720p (50/60Hz), 480p, and 576p.DVI/PC/HDMI/AUDIO INHDMI IN 1, HDMI IN 2,HDMI IN 3, HDMI IN 4HDMIDVI/PC/MAGICINFO IN
