44MagicInfo Setup Wizard - v.1.12Select TCP/IP - step 2Obtain an IP address automaticallyUse the following IP address:IP address:Subnet mask:Default gateway:192 . 168 . 0 . 102255 . 255 . 255 . 0192 . 168 . 0 . 1Obtain DNS server address automaticallyUse the following DNS server address:Preferred DNS server:Alternate DNS server:10 . 44 . 33 . 2210 . 33 . 22 . 11< Back(B) Next(N) > Finish CancelMagicInfo Setup Wizard - v.1.12Select Language -step 3Select the language you want to install on the system for menus anddialogs.Current Language : EngilshGermanEnglishFrenchItalianChinese [Traditional]JapaneseKoreanRussianSwedishTurkishChinese [Simplified]Portuguese< Back(B) Next(N) > Finish CancelMagicInfo Setup Wizard - v.1.12Select Screen Type - step 4LandscapePortrait< Back(B) Next(N) > Finish CancelMagicInfo Setup Wizard - v.1.12Setup Information1. Application : MagicInfo Pro [LAN,WAN based version\2. Internet Protocol [TCP/IP]IP : 192.168.0.1023. Language : English4. Screen Type : LandscapeDo not show again< Back(B) Apply Finish Cancel4 Enter the IP information.5 Select a language. (The defaultlanguage is English.)6 Select a display mode.7 Double-check the settings youhave just configured.― If the execution icon does not appear,double-click the MagicInfo icon onthe desktop. The icon will appear atthe bottom right of the screen.
