Preventing the TV from falling1. Using the appropriate screws, firmly fasten a set of brackets to the wall.Confirm that the screws are firmly attached to the wall.– You may need additional material such as wall anchors dependingon the type of wall.2. Using the appropriately sized screws, firmly fasten a set of brackets tothe TV.– For the screw specifications, refer to "Standard Screw" in the tableon the previous page.3. Connect the brackets fixed to the TV and the brackets fixed to the wallwith a durable, heavy-duty string, and then tie the string tightly.– Install the TV near the wall so that it does not fall backwards.– Connect the string so that the brackets fixed to the wall are at thesame height as or lower than the brackets fixed to the TV.Detaching the Terminal Stand Cover from the TVDetaching the Clean Back Cover Terminal from the TVEnglish - 11