Samsung QN75Q7FAMF User Manual

Also see for Q7F: E-manual User manual Manual User manual User manual

English - 802 TV InstallationInvisible Connection GuideONE CONNECTOne connectTo connect the Invisible Connection cable to the One Connect and your TV, take the following steps:1. Read all the instructions below before you begin.2. Carefully remove the Invisible Connector from its Styrofoam protector.3. Carefully unwind the cable (with the icon) from the cable holder of the Invisible Connection. Unwind enoughcable to make the connection between the TV and the One Connect Box.– If you unwind the cable (with the icon) from the cable holder, the cable may be entangled or damaged.[ DO NOT bend the One Connect fiber optical cable. Especially, do not bend the cable at a right angle. You can damage orbreak the cable. The TV will not work if the cable is broken or damaged.4. Connect the connector with the icon to the TV, and then connect the connector with the icon to the OneConnect as shown in the illustration above.5. Connect the One Connect AC power cord to the One Connect and to a power outlet as shown in the illustrationabove.• When connecting the Invisible Connection, use a Bending Cover, which prevents the cable of the InvisibleConnection from being bent at a 90 degree angle. Failure to do so may cause damage to the cable.• When connecting the Invisible Connection, pay attention to the shapes of its connectors so that they areconnected correctly. Failure to do so may cause product malfunction.• After connecting the Invisible Connection, wind the remaining cable around the cable holder of theInvisible Connection. Just winding or leaving the remaining cable as it is may cause damage to the cable.• When connecting the Invisible Connection, be careful not to twist the cable of the Invisible Connection.Failure to do so may cause performance degradation to the TV or damage to the cable.• To prevent the Invisible Connection from being damaged, do not subject the Connection to the following:Bending Twisting Pulling Stepping on Pressing onCLASS 1 LASER PRODUCT• Caution - Invisible laser radiation when open. Do not stare into beam.– Do not bend or cut cables excessively.– Do not place heavy objects on the cable.– Do not disassemble the connector of the cable.• Caution - Use of controls, adjustments, or the performance of procedures other than those specifiedherein may result in hazardous radiation exposure.