Setting Up _111212101101 sEtting uPREattaCHing tHE REFRigERatoR DooRsassemble the Refrigerator doors1. Reattach two flat head screws( 1 ) and two hex headscrews( 2 ) to the hinge completely.2. Place the hole in the bottom of the door( 3 )over the lowerhinge ( 4 )Be aware not to miss the hinge cap because it canbe easily taken off.3. Insert the upper hinge shaft( 5 ) into the hole on thecorner of the Refrigerator door( 6 ). Make sure the hingeis level between the upper hinge hole( 7 ) and the hole ofthe cabinet( 8 ) and reattach the hinge screws( 9 ) andground screw( 10 ) by turning in a clockwise direction.Reconnect the wires.4. Place the front edge of the top table( 11 ) on the front of theupper hinge( 12 ) and reattach with three screws.When reattaching the top table, make sure that thewires are not pressed or damaged by the top table.56789101211
