Samsung RF263AERS User Manual

Also see for RF263AERS: Quick start guide User manual Specifications User manual

Contents

Operating _21using tHE CoLD watER DisPEnsERContRoLLing tHE tEMPERatuRE02 oPERatingusing the water dispenser (RF266)Place a glass underneath the water outlet and push gently against thewater dispenser lever with your glass. Make sure the glass is in line with thedispenser to prevent the water from splashing out.If you have just installed the Refrigerator or just installed a new water filter,pour out the first six glassfuls of water to flush out impurities in the watersupply system. Make sure water flows cleanly before drinking.Controlling the Freezer temperatureThe Freezer temperature can be set between 8°F and -14°F to suit your particular needs. Press theFreezer button repeatedly until the desired temperature is shown in the temperature display. Keep inmind that foods like ice cream may melt at 4°F.The temperature display will move sequentially from -14°F to 8°F. When the display reaches 8°F, it willbegin again at -14°F.Five seconds after the new temperature is set, the display will again show the actual current freezertemperature until the new temperature is reached.Controlling the Refrigerator temperatureThe Refrigerator temperature can be set between 46°F and 34°F to suit your particular needs. Pressthe Fridge button repeatedly until the desired temperature is shown in the temperature display.The temperature control process for the Fridge works just like the Freezer process.Press the Fridge button to set your desired temperature. After a few seconds, the Fridge will beginadjusting towards the newly set temperature. This will be reflected in the digital display.The temperature of the Freezer or the Refrigerator may rise from opening the doors too frequently, or if alarge amount of warm or hot food is placed in either side.This may cause the digital display to blink. Once the Freezer and Refrigerator temperature return to theirnormal set temperatures, the blinking will stop.If the blinking continues, you may need to “reset” the Refrigerator. Try unplugging the appliance, wait foraround 10 minutes and then plug the power cord back in.If you have a long vacation or business trip, close the watervalve and shut off the water supply to the Refrigerator. This will help prevent accidental leakages.When you do not use the water dispenser for 2~3 days (especially during thesummer), the dispensed water may have a funny smell or taste. If this occurs, werecommend that you discard the first 1~2 glasses for better tasting water.Please wait 1 second before removing the cup after dispensing water to prevent spills.CautionCaution PUSHOne Touch Pure WaterWater clouding phenomenonAll water provided to refrigerators flows through the core filter which is an alkaline water filter. In this process,the pressure in the water that has flowed out of the filter gets increased, and oxygen and nitrogen becomesaturated. When this water flows out in the air, the pressure plummets and the oxygen and nitrogen getsupersaturated so that they turn into gas bubbles. The water could look misty due to these oxygen bubbles.The water may look temporarily cloudy due to these oxygen bubbles. After a few seconds, the water willlook clear.