12_ setting up4. Attach the Adjustable Leg Cover using a Phillips(+) Screwdriver.How to Assemble Fridge Door1. Attach the detached Fridge Door to the MidHinge.2. Slide the Fridge Hinge (C) into the fixing slot,and then press it down so that it is aligned withthe hole in the door.3. Inserting the Fixer Lever (B) in the direction ofthe arrow, and then flip it down to assemble.4. Assemble the Wire Connector.CBB5. Connect the Water Tube [E]. If the model hasred clips, attach them now to the Coupler [F].Connect the connector [G] on the left door andthe connector [H] on the right door.Red Clip(6.35mm)GEHF6. Attach the front of the Top Cover, and thenpress down on its back until it lies flat. Re-attach the screws.• Assemble the Fridge and Freezer doorsin the reverse order of disassembly.• If the Wire Connectors are cross-assembled, the display will not workproperly.• Clips are located inside the cap on thetop.• To prevent water leaks, if the refrigeratoruses red clips, make sure the red clipsare properly connected to the Couplerafter you insert the Water Tube [E] intothe center of the Coupler.Center of theIndicator Lineclip A(6.35 mm)ECAUTIONDA68-02918A-01.indb 12 13. 4. 25. �� 2:30