Samsung RF4267HA User Manual

Also see for RF4267HA: User manual User manual

Operating _1902 OPERATING2. Tempered Glass shelvesTo remove - Tilt up the front of the shelf in thedirection shown ( 1 ) and lift it upvertically ( 2 ). Pull the shelf out.To relocate - Tilt the front of the shelf up andguide the shelf hooks into the slotsat a desired height. Then lower thefront of the shelf so that the hookscan drop into the slots.The Tempered Glass shelves are heavy.Use special care when removing them.3. Vegetable & Fruit DrawersTo remove - Pull the drawer out to full extension.Tilt up the front of the drawer andpull straight out.To relocate - Insert the drawer into the frame railsand push back into place.The drawers need to be removed before theglass shelf above them can be lifted out.4. Flex ZoneTo remove the Flex Zone – Pull the Flex door outto full extension. Lift the Flex Zone up, pulling it toyour body with both hands.To relocate the Flex Zone – Open the Flex door tofull extension. Tilt the front of the Flex Zone up,place the back of the Flex Zone onto the rails,and then lower the front until the whole Zonerests on the rails.When the Flex Zone or LED lighting are notworking, check the connectors [ ( 1 ), ( 2 )shown below] for cracks or leaks.1. Refer to page 7 for disassembly instructions.2. Open the cover housing with a flat-bladescrewdriver.using the doorsEnsure that the doors close all the way and aresecurely sealed.When the refrigerator door is only partially open,12cAuTIONcAuTION12